Skip to content

Cookies 🍪

This site uses cookies that need consent.

Learn more

Zur Powderguide-Startseite Zur Powderguide-Startseite
gear of the week

Gear of the Week | Meidjo Telemark Binding

Telemark is not dead

by Lea Hartl 12/03/2016
The telemark trend that seemed to be on the rise a few years ago may be over, but the scene lives on. You could even say that there is more going on in the area of material development for the free heel group than for the chronically uninnovative alpine bindings. The New Telemark Norm is already several years old and the latest news is more about tech-tele hybrid bindings, which are gradually making it from garage tinkering to market maturity. We took a look at the Meidjo from The M Equipment at the Telemark Opening in Hintertux.

Telemark-capable, modified tech toe pieces are not a new idea, but the corresponding bindings have only been available to buy for a few winters. The Meidjo from The M-Equipment has a more or less classic tech toe piece that snaps into the boot using tech inserts (assuming you have NTN boots with inserts...). In addition, the forefoot snaps with the boot sole into a movable "plate" under the boot, which produces the spring resistance for the descent - similar in principle to the NTN.

The "spring plate" can be blocked with a small wire lever so that it remains fixed to the ski and the boot only hangs with the inserts in the binding. You therefore have the completely free pivot point of a tech binding for the ascent. As an additional option, there is a tech rear jaw, which can be pushed forward with a lever for a fixed heel if required. The binding can be locked (like a tech binding), otherwise it releases in the limited manner of a tech toe piece. It is also possible to release the binding "at the back", where the boot hangs on the spring. The release value here can be regulated via a separate spring.

gear of the week
presented by

The spring resistance for the descent is also adjustable. There are interchangeable springs of different strengths, between very soft and very hard. The resistance only becomes noticeable after the first few centimeters of foot lift and then flexes progressively. In contrast to typical cable bindings, there is a clear "rebound" when coming back up - the spring pulls back noticeably, at least with the harder versions.

The handling is relatively good, especially with the version without stoppers, it is easier to get on than with some alpine tech touring bindings. The (optional) stoppers make entry a little more difficult, but you have stoppers... In my opinion, the two-stage folding climbing aid is too high and could be optimized. The durability of the Meidjo has probably improved significantly since the first prototypes, but we can't say any more after riding it once.

In summary: The Meidjo is a well thought-out, very versatile telemark binding (with an alpine option for occasional heel fixation). Whether you need the various features, or whether you need them urgently enough to pay the high purchase price compared to other bindings, remains to be seen. As you need shoes with inserts for the Meijdo NTN, the choice of shoes is somewhat limited.

An alternative Tech-Tele system is available from Moonlight, but we haven't tried it out. Here, the boot is also fixed in a tech front jaw, but the downhill resistance is generated by a cable.

Fringe note after a long tele break: Apart from the binding developments, the telemark scene seems largely unchanged. The World Cup skiers go freeriding between their runs, completely unknown Scandinavians jump Tele 12s in the park, equipment still tends to break. And if someone can telemark really well, it still looks damn cool.

Getting into the binding (with stoppers):

Photo gallery

This article has been automatically translated by DeepL with subsequent editing. If you notice any spelling or grammatical errors or if the translation has lost its meaning, please write an e-mail to the editors.

Show original (German)

Related articles

Comments

gear of the week
presented by