Skip to content

Cookies 🍪

This site uses cookies that need consent.

Learn more

Zur Powderguide-Startseite Zur Powderguide-Startseite

Language selection

Search PowderGuide

news

World of Science | The next generation of weather models

Higher resolution, lower computing time

by Dylan Reynolds 04/06/2023
Numerical weather forecasts and snow models are now very good, but there is still room for improvement. In the mountains, the complex topography is one of the biggest challenges for weather models. Every mountain peak and every valley influences the movement of the atmosphere and thus small-scale processes such as snow drifting.

Dylan Reynolds is a PhD student at the SLF and researches how high-resolution weather simulations can be improved and coupled with snow models. In the following article, he explains his research and why avalanche forecasting can also benefit from faster weather models.

The steep, complicated topography of the Alps is a blessing for anyone who enjoys skiing and mountaineering. From rugged peaks, the route descends steeply into deep valleys. The views are beautiful, but the complex terrain is a nightmare for the atmospheric models that are supposed to predict the weather here. Very high-resolution models are needed to predict snowfall in the mountains. Avalanche warning services often use snow and wind information that is statistically generated from a range of different data products. This is useful, but with high-resolution weather models you could calculate the underlying processes directly instead of relying on spatial statistics.

Why isn't this done? The computing power required for such models is simply too great. A lot is being invested in the next generation of weather models, but it will probably be at least another 10 years before we have operational numerical weather forecasts on such scales. To improve the forecasts anyway, we can look for ways to simplify the complex, high-resolution models without compromising the results too much.

In a recent study (Preprint), we present such a simplified model: HICAR (High-resolution Intermediate Complexity Atmospheric Research Model). With HICAR, we can carry out simulations on a scale of a few 100 meters. And 100 times faster than traditional weather models! If the computing time of the models is reduced this much, high-resolution simulations over larger areas are slowly coming within reach. The HICAR concept is based on downscaling. This means that existing regional forecasts are converted to smaller spatial scales. This in turn improves snow forecasts in complicated terrain.

Comparing HICAR with WRF, a widely used regional weather model, the results are not bad. For example, HICAR calculates very similar wind speeds in layers close to the ground as the WRF model. This is important for snow because wind drift near the ground has a strong influence on snow distribution. In contrast to rain, the wind near the ground is decisive for the amount of snow that ultimately reaches the ground. HICAR was developed to better simulate the so-called "preferential deposition" of snow. This means that the model specializes in calculating exactly where more or less snow arrives due to the interplay of wind and topography. Here too, initial results show that HICAR finds similar patterns to the WRF model, but these are more pronounced. A comparison with measurement data is still needed to determine more precisely which model better reflects reality.

Even if the snow is already on the ground, it can still be transported later by the wind. Anyone who has ever been skiing in a snowstorm will be familiar with this phenomenon. If the wind is strong enough, snow crystals are lifted from the ground and transported further by the wind. This often leads to large drifts and accumulations of drifting snow. For avalanche forecasting and hydrological applications, it is important that both the deposition of snow during snowfall and subsequent drifting are well represented in the model.

In an ongoing study, our team is attempting to link HICAR to a snow model. So far, the coupled model is only running for a small test region, but the study proves that it is possible to carry out high-resolution simulations over an entire winter in complex terrain. Until now, this was not a matter of course!

The first results show that the combination of HICAR and a snow drift model can simulate drifting on the scale of individual ridges and terrain edges. An important prerequisite for predicting drift snow danger using a model! We hope that HICAR will eventually be able to calculate drifting snow volumes and hazard locations on individual slopes to support the hazard assessment of the warning services.

HICAR has already been used to simulate winter precipitation over the Swiss Alps with a spatial resolution of 250m. This has worked well, in some cases better than with other methods. Winter precipitation is particularly important for the SLF's Operational Snow Hydrological Service (OSHD). A snow model with a similar resolution is operated within this framework. We are confident that HICAR can be used operationally in the coming years and combined with the OSHD model. With its special downscaling method, HICAR would represent a kind of bridge between the less high-resolution weather data from MeteoSwiss and the OSHD snow model. This model chain could simulate snow processes in the mountains better than the individual models alone have been able to do so far.

HICAR will not replace the existing weather forecasts. HICAR's shorter computing time is due to the fact that it uses a lot of data from the other models and does not have to calculate everything itself first. HICAR will not be used instead of other models, but with them. Model chains and downscaling methods such as those used in HICAR can help us to better understand the complicated processes that take place in the mountains between the atmosphere and the snow cover.

This article has been automatically translated by DeepL with subsequent editing. If you notice any spelling or grammatical errors or if the translation has lost its meaning, please write an e-mail to the editors.

Show original (German)

Related articles

Comments