Skip to content

Cookies 🍪

This site uses cookies that need consent.

Learn more

Zur Powderguide-Startseite Zur Powderguide-Startseite
gear reviews

Gear Review | Atomic Shift² 16 MN

In Search of the Perfect Hybrid Standard

Japan
11/21/2026
Pascal Schindler
The introduction of the first generation of the Atomic Shift marked a turning point in the world of freeride and touring bindings. The balance between the efficiency of a pin binding on the ascent and the elastic release characteristics of a full-fledged alpine binding on the descent set new standards. With the Shift² 16 MN, Atomic now presents the advanced second generation.

In addition to detailed revisions to known weak points—such as a modified sliding plate and a completely new heel design with a higher metal content—the expanded DIN adjustment range up to a Z-value of 16 elevates the model to a new performance level.

What exactly does Shift² 16 MN mean?

The model designation Shift² 16 MN accurately captures the binding’s key specifications. The name “Shift” says it all, as this true hybrid binding switches between two worlds: Uphill, the front jaw functions as an efficient Pin-Tech binding, with the pivot point located very close to the toes. This enables a natural rolling motion and conserves energy, since—unlike with classic frame bindings—the weight of the entire structure does not have to be lifted with every step. At the summit, the Shift transforms into a full-fledged freeride binding with alpine front and rear jaws, complete with the corresponding elastic release characteristics.

The “2” stands for the second generation of the binding, with which Atomic is introducing the first upgrades and refined details. The most striking innovation is reflected directly in the number 16: While previous models were limited to a maximum Z-value of 13, the new version now covers a adjustment range up to a Z-value of 16.

Finally, the additional abbreviation “MN” stands for “Multi-Standard.” The binding is therefore officially certified for all common boot standards, such as Alpine (ISO 5355) and GripWalk (ISO 23223).

Installation & Drill Pattern of the Front Jaw

Regarding the installation of the front jaw, the screw arrangement is worth noting: It is secured to the ski with three screws. One screw is positioned toward the toes, and two others are placed side by side toward the center of the foot; together, they form a triangle. Compared to the first generation of the Shift, there is no change in this regard.

Compared to standard alpine bindings, which typically have four screws on the front plate, this drilling pattern is different.

First Impressions

Compared to the first generation, the increased use of machined aluminium components is immediately noticeable. In addition to the redesigned Hike & Ride Switch, the internal components are now also made of metal. The enlarged lever for switching the front jaw between hike and descent modes is easy to grip, even when wearing thick gloves. While playing around with the binding, I also noticed that manually squeezing the jaws together in hike mode causes the switch to lift slightly, making it even easier to operate.

The heel design has been completely overhauled. Atomic has incorporated its three-lever heel system, similar to the one used in the heel section of the Atomic Strive. This provides greater elastic travel, effectively absorbing impact forces and helping to prevent accidental releases. The boot is actively held in a central position and pushed back into place when subjected to impacts. A redesigned base plate made of metal and rubber helps dampen vibrations.

At the front, the new Micro-AFD front section, featuring an integrated aluminium Power Block, replaces the previous glide plate. This design is intended to prevent the glide plate from sinking or shifting under load, ensuring backlash-free power transfer.

Tester & Test Conditions

I’m 1.85 m tall, weigh around 78 kg, and would describe myself as a highly advanced skier. I’ve been skiing for nearly 20 years and have had the chance to ski pretty much everything with edges (and plenty without them) during that time. I have the most fun in playful terrain, where I can throw in the occasional trick. On the piste, you’ll usually find me when things get really bumpy. I tested the binding on a 188 cm Atomic Bent 110.

I was able to put the binding through its paces both in the land of powder dreams (Japan), during a two-week trip, and back home in the ski resorts and mountains around Innsbruck. This meant using it on backcountry tours, during long days at the resort with detours to the fun park, and while charging down the slopes.

The test covered pretty much every snow condition imaginable: from Japanese powder and fresh Alpine snow to icy, rutted slopes, wind-packed crust, steep moguls and rugged treeline terrain, all the way to wet spring slush and firn.

Ascent & Handling

The basic adjustment of the binding requires a Phillips-head screwdriver for the front jaw and the Micro-AFD glide plate. Thanks to the angled adjustment screws, the height of the glide plate is easy to adjust. At the heel, however, Atomic uses a large slotted screw. With strong fingers, you could theoretically adjust it using a suitable coin, but I ended up reaching for the largest flat-head screwdriver I had.

As a skier who usually relies on a CAST system for my Look Pivot bindings, the design advantage of the Shift concept becomes immediately apparent when reaching the first summit. Unlike interchangeable systems such as CAST or the new Tyrolia Attack Hybrid, the front binding doesn't need to be removed, swapped out and stowed in your backpack. This may seem like a small detail, but in practice, I found it to be a real advantage on cold and windy summits.

In ascent mode, the brakes are locked in place using the integrated lever. Over approximately 5,000 metres of elevation gain during the test, the brake only released unintentionally once, when it caught on my other ski.

With the brakes locked, your heel is already positioned slightly higher than in the flat, default position. The additional climbing aid can easily be folded up and down using a ski pole. However, the binding offers only one additional climbing position. Personally, I prefer to walk with my heels slightly elevated to minimise friction against my thigh pads, so I tend to use the climbing aid even on gentle inclines. As a result, I initially found myself wishing for an intermediate position.

Switching back to downhill mode is super straightforward. As with other bindings, you just need to make sure there's no excess snow or ice in the gaps that close during the transition, allowing the mechanism to lock fully into place.

Downhill Performance

I'm completely convinced by the downhill performance. On the descent, the Shift² 16 MN skis just like an alpine binding. The spongy feeling or noticeable play around the heel, common with many classic pin bindings, is completely absent. Initially, I was a little cautious on the slopes as I got a feel for the binding's limits, but I quickly gained confidence.

Thanks to the redesigned Micro-AFD Power Block, the height adjustment of the glide plate remained stable even after wild mogul runs and jumps. The base plate sliding down is now a thing of the past.

The combination of the new metal-reinforced base plate and the three-lever heel piece eliminates play and enables direct power transfer. Vibrations and hard impacts on rough, uneven terrain are noticeably dampened without making the connection to the ski feel spongy.

I didn't experience a single unintended release throughout the entire testing period. Whether skiing through broken crust, deep powder, rutted slopes, icy moguls or wet spring slush, the binding did exactly what I expected of it every time.

Conclusion

While the first generation of the Shift already revolutionized freeride touring, the Shift² 16 MN represents a well-thought-out evolution. The redesign addresses previous weaknesses—particularly the new glide plate design with an aluminum power block—eliminating the need for tedious readjustments and enhancing both stability and the precision of power transfer.

The expanded adjustment range up to a Z-value of 16 makes this binding the ideal choice for heavier or particularly aggressive riders looking for a binding that performs without compromise on both ascents and descents. For me, the Shift² 16 MN thus fully meets the definition of a true hybrid binding for everyday freeriding and ski touring.

It’s also worth noting that the Shift² 16 is sold by Salomon with the same construction; the bindings differ only in color and branding.

Pros & Cons

Pros

  • Pin-Tech on the ascent, alpine bindings on the descent
  • Great downhill performance, thanks to the new heel section and the Micro-AFD forefoot section
  • Easy to use, even while wearing gloves
  • lower price range for comparable bindings
  • No need to remove or install binding components during conversion (pin mounting is directly integrated)
  • Existing Generation 1 drill holes can still be used (3-hole pattern on the front jaw)

Cons

  • Just three screws hold the front jaw in place on the ski
  • Only one step is available in climb mode
  • No lightweight

Details

  • MSRP: €649.99

  • DIN Range: 8.0 – 16.0

  • Weight: 1,090 g per piece (without stopper) / approx. 1,210 g (with stopper)

  • Adjustment range: 30 mm (heel length adjustment)

  • Height above ski surface: approx. 30 mm

  • Stopper widths: 90 / 100 / 110 / 120 mm

  • Multi-Standard (MN) Certification: Compatible with alpine (ISO 5355), GripWalk (ISO 23223), and touring boots (ISO 9523)

  • Climbing aids: One basic position (2°) and one additional climbing aid (10°)

  • Crampons: Due to the design of the toe piece, special Shift crampons are required

Clickhere to visit Atomic’s website for more information. You can purchase the binding from our partner shop, Sport-Bittl, here.

The binding was provided to PowderGuide free of charge by the manufacturer. Find out how we test in our test statement.

Photo gallery

The people behind the article

  • Written by

    Pascal Schindler

    Ever since I was a child, the mountains have been more than just a backdrop to me—they’re my playground and my teacher. Having grown up in the Alpine foothills, my great passion for skiing has since led me to Innsbruck. As a cosmopolitan explorer, I love spending time outdoors, always on the lookout for new insights and creative projects related to mountain sports.

  • Post-edited by

    Johanna Korte

    Johanna (Jojo)’s love for the mountains took her to Innsbruck in 2020, where she spent around four years exploring the surrounding alpine landscape whenever she had a free moment. After a season in Japan, she unfortunately found herself a little further away from the mountains in Freiburg in 2025. But that hasn’t kept her from pursuing her passion: summer or winter, she still spends every free moment she can in the mountains. In winter, you’ll most likely find her in a mountain hut or on her way to the next powder run. Her bilingual education brought her to PG, where she is responsible for translating the website and occasionally contributes articles of her own.

Note

PowderGuide.com is non-profit-oriented, and we are grateful for any support. This article was automatically translated using DeepL and our own glossary, and subsequently post-edited by the person mentioned. If you nevertheless notice any errors or something remains unclear, please feel free to write an email to the editorial team.

Show original (German)

Topics

Related articles

Comments